Agriviv HOOF-it Powder is the ultimate in hoof repair. Mixes with HOOF-it Liquid acrylic for quick application of blocks or boots to the claw. Available in slow cure or fast cure. Fast cure is recommended for use in temperatures 70 degrees Fahrenheit and below. Slow cure is recommended for slower setting powder in temperatures 80 degrees Fahrenheit and above. Easy to mix and use, and provides consistent results with less odor compared to other products.

Species: Beef and dairy cattle

FEATURES / BENEFITS

Acrylic hoof repair for beef and dairy cattle.

Less temperamental to heat and cold than many other products.

Mixes easily with HOOF-it Liquid.

Less odor compared to other products.

SPECIFICATIONS

Product generates heat in the curing process, yet will not burn the hoof or claw.

Wear latex gloves when mixing.

INSTRUCTIONS

Treat the injured claw. Create a clean, flat, dry surface on the sound toe. Pour 25 ml HOOF-it Liquid into the Mixing Toe (left or right) up to the measuring line or into the HOOF-It BootBlock. Add approximately 50 g of HOOF-it Powder for a 2:1 ratio, mixing into a paste with the included wooden spatula. Place the wood block into the Mixing Toe, touching the toe of block into the front tip and firmly seating the block into the Mixing Toe. Spread the paste thickly and evenly on wood or BootBlock. Press block onto cow’s prepared, sound claw, leaving a layer of glue (about 1/8-inch thick) to allow the block to adhere to the claw. Spread excess glue thickly and evenly along edges of block and claw. Hold block to claw until mixture hardens (2 to 3 minutes). Let cow stand on block before releasing.